Antique Rules and Rulers

He killed six victims and wounded seven others by July As the number of victims increased, Berkowitz eluded a massive police manhunt while leaving letters that mocked the police and promised further crimes, much publicized by the press. He achieved worldwide notoriety. David Berkowitz IQ was tested at Berkowitz was arrested by New York City police homicide detectives during August , and was indicted for eight shooting incidents. He confessed to all of them, and claimed to have been obeying the orders of a demon, manifested in the form of a dog “Harvey” who belonged to his neighbor “Sam”. Despite his explanation, Berkowitz was found mentally competent and incarcerated in state prison for murder. In the course of further police investigation, Berkowitz was also implicated in many unsolved arsons in the city.

STARRETT Trademark Information

The rocking frog is held in place by a pin that is inserted through the sidewalls of the plane and the frog. As shown in the schematic drawing See Figure 1 , the first threaded rod is screwed through a threaded hole in the frog casting. As this short threaded rod is tightened it applies pressure to a flat leaf spring that rests in two grooves cast into the bed of the plane.

The HVR-Flip from Starrett is the latest in a line of video-based measurement systems. Rapidly measure a single feature, an entire part, or multiple parts up to x 3″ with the HVR-Flip’s large FOV.

Look for chisels with wooden handles or with specialty, curved blades. Buying Antique Tools Ideally, you’ll be able to find hand tools in person. The quality of a tool, and its usability is difficult to determine remotely. However, there are several reputble antique dealers where you may find just the thing you were looking for: Bob Kaune – An incredibly easy-to-navigate site that sells many types of antique tools including saws, chisels and planes. The site organizes most tools by their manufacturer, making it easy to pick out something specific.

Falcon-Wood – Falcon Wood sells a variety of tools for woodworking and other trades. They are also a helpful resource, stocking books and inviting patrons to email with questions. Donnelly’s Antique Tools – Tools have to be bought at an auction, but the site lists the times and dates of upcoming auctions. The Best Things – An online antiques and collectibles store. Known for a broad collection, it’s a good place for a novice to start.

Tips for Shopping in Person If you’re just beginning your tool collection, follow these tips to ensure you get what you’re after:

Original Gristmill Index

Non-stop action, and a cut above some of the others. Lots of unsavory groups of maniacs, assault, Neo Nazis, and sexy Sabrina Siani add to the fun. See what you need to do when the bombs drop! Super Neat helpful hints that may just save your life!

The Starrett tools product line includes precision measuring tools (micrometers, calipers, rules, etc.), levels, electronic gages, dial indicators, gage blocks and granite surface plates and custom engineered products. The precision group also includes M1 lubricant, precision ground flat stock and drill rod.

The museum is open Monday through Saturday from 9 AM to 5 PM if you wish to see the machines and other displays in person. Click photo for larger image. Upon leaving the radio control industry in the ‘s he began as an importer for small lathes from Australia that were to be sold by Sears under the Craftsman name. He also marketed the tools himself under the Sherline name and eventually began producing them in the United States in , having purchased the rights to do so.

Expanding the tool and accessory line over the years has given him an appreciation for what these early manufacturers had to deal with in the design, production and marketing of small tools. A few years ago Joe began purchasing small tools as he found them available at shows or auctions. Several have since been donated by other patrons who appreciate small tools and want share them with others. This is just the basis of a good tool collection.

The foundation plans to continue to add to this collection as interesting machines become available.

‘Boyfriend loophole’: backlash after Oregon joins 23 states in curbing guns

The shop serves not only as an artifact in the museum’s diversified collection of 19th and early 20th Century industrial and scientific items, but it also functions as a working shop that is used in the restoration of other pieces in the collection, and in our traditional organ building and restoration work. Here are a few photos of our growing traditional shop tools collection. We also plan to sponsor future public demonstrations of traditional woodworking at area fairs and gatherings, as well as at the museum’s headquarters.

The photo above is of our recently acquired Buffalo Forge post drill.

Superelastic nickel-titanium (Ni-Ti), or nitinol, alloys are becoming integral to the design of a variety of new medical products. The enormous elasticity of these alloys is the most dramatic advantage afforded by this material, but by no means the only or most important one. Also discussed in this.

Billed as the largest electric shovel in the world today, big doesn’t begin to describe Brutus. On the flats of southeastern Kansas it stands out for miles. A single scoop from its bucket could fill three railroad cars with 90 cubic yards, or about tons, of material. Three-man crews worked Big Brutus day and night all year round. In , Bucyrus supplied 77 of the steam shovels used to dig the Panama Canal. In my toolbox, I keep a big Craftsman screwdriver for big jobs.

I bought it in the late s and it’s now a bit worse for the wear. In the early s, I purchased a backup which I keep in my other toolbox. It’s a Fuller , easily identifiable to tool aficionados by its characteristic transparent yellow molded acetate plastic handle with red top. The model is slotted aka: Overall length is just over 11 inches. The shaft is hardened chrome-vanadium steel and still retains its original shine. The red top is a little beat up from being hammered – I sometimes use my big screwdrivers as a chisel, even though I have a perfectly good chisel somewhere.

I can never find it when I need it.

Top 30 Intelligent Serial Killers With Highest IQ

Jim DuPont For many drivers, sitting in third place in the points standings at the halfway point of a season would be considered a good thing. But for Timmy Solomito and the 16 Starrett Tools team, the season is not quite where they want to be after winning 5 races and finishing second in the championship by a scant 6 point margin last year.

With the August 3 Starrett at Stafford Speedway kicking off the second half of the NWMT season, what better place and time for Solomito to pick up his first win of the season than in a race that is sponsored by his team sponsor?

Displays feature Henry firearms dating from the American Fur Trade, the War of , the Civil War, the American West, and the early twentieth century. Most of the firearms were made by the Henrys of Bolton, but the collection also contains arms made by Abraham Henry (), who apprenticed in Nazareth under his brother William Henry II.

Click link to see other Sales Archive Pages on this Site. We can help you sell quality Antique Tools Contact Us. Most prices seen reflect actual sale results from this website. Prices seen span a long time and may not reflect current values. Some are selling for more, many now sell for less. On other pieces you will see no price, or a price range, with or without an explanation. The reasons for that are discussed on the FAQ page. Our current offering of Antiques for sale are at our sister Website Patented-Antiques.

Timmy Solomito In Search Of Victory Lane In Whelen Mod Tour Starrett 150 At Stafford

This may be the longest thank-you note you ever receive pro-fessionally, and it is certainly heartfelt on my part. Bliss was one of the princes of the BSI, a gracious gentleman whom everyone admired. A chemical engineer by education, he was by then a long-retired vice president of U.

Starrett Rules. Welcome to our reviews of the Starrett Rules (also known as adult swim music video).Check out our top 10 list below and follow our links to read our full in-depth review of each online dating site, alongside which you’ll find costs and features lists, user reviews and videos to .

Posts 11 I’ve cleaned up lots of machinist rules from a negelected state, including many combo square rules. Yes, I have too many combo squares! Also, they look uncleaned, as in not a trace of overcleaning which to me can look garish. Just a nice clear semi shiny surface finish similar to what they started out with, and completely readable. One aspect easy to neglect is a rounding over effect on the edges that really makes it harder to see the graduations as clearly.

The rubber erasers work okay sometimes, but leave a surface finish well short of what I’d prefer if there’s more than a spot or 2. I am careful to lay the rule on a flat surface and to hold the sanding block so it lays completely flat on the rule while rubbing. Note that it is best if the sandpaper has been used slightly, as it starts out with peaks that can tend to round over edges, though you don’t have to be too obsessive for this application.

Assuming there is only stain and no rust, rub until the rule gets reasonably shiny near the edges and the graduations are all nice and clear. Now switch to a small piece of the same grit sandpaper, use finger pressure to rub out additional stains in the middle of the rule but keep it away from the edges unless you have a small local area that the first part couldn’t get to.

But quality rules tend to clean up very evenly as they were made flat to begin with. With “local work” you can get an area shinier than the rest, just go back over it with the block to even it out.

Hand Tools in Toronto (GTA)

Click link to see other Sales Archive Pages on this Site. Most prices seen reflect actual sale results from this website. Prices seen span a long time and may not reflect current values.

Jan 15,  · Quick video showing what I did to modify my auto punch to make it strike harder without having a stronger spring.

Visit the The Wrenching News Homepage for a list of other wrench auction catalogs and information on future wrench auctions and other events, information on collecting antique wrenches, and a discussion board. Visit the The Wrenching News Store for a large selection of wrenches and related items for sale. Both starting collectors and advanced will find something they need there. Contact us if you want to dispose of your old wrenches one or a collection.

We have either managed or assisted with the sale of most of the major wrench collection that have been sold in the last several years. I am also available to advise and assist auctioneers who have old wrenches to auction. Among the nearly wrenches in this auction are rare and interesting wrenches from all the different categories of antique wrenches with examples for the most advanced collectors to those just starting to collect.

Included in this first of two sales are rare cutout wrenches including: Zenith, Bradley’s Wonder, Ames, and a very rare Deere variant with two hammer polls. There are a large number of other John Deere wrenches including: Other categories include; a large number of H.

Starrett Factory Tour!